Ivan Brunello
2007-05-23 17:19:42 UTC
Good news.
I'd prefer TSL policy (and indeed use TSL whenever possible).
Just needed services, and almost none active by default.
I name TSL the "OpenBSD" of linux distros.
But sometimes circumstances force me to use a more common distro,
and I'd prefer CentOS, due to its "RHELish" nature (and my RedHat
Backgorund).
Ivan
I'd prefer TSL policy (and indeed use TSL whenever possible).
Just needed services, and almost none active by default.
I name TSL the "OpenBSD" of linux distros.
But sometimes circumstances force me to use a more common distro,
and I'd prefer CentOS, due to its "RHELish" nature (and my RedHat
Backgorund).
Ivan
Date: Wed, 23 May 2007 15:50:27 +0200
Subject: Re: Fw: TSL & Hardware - FAILURE ---> SOLVED
Content-Type: text/plain; charset="iso-8859-1"
Hi Cristian
good news...i've solved the problem.
I "RTFM" and check the dat, all jumpers were right, the scsi terminator
was right...scsi id usually is 6...
umhh...start again, check adaptec scsi bios (ctrl+a to start scsi
utility)...watching around parameters i found a channel ID 7 !!!!!! FOUND !
change to 6 save & reboot... DAT recognized...(more that one exactly...one
for each channel)...also CentOS found my dat, i did some test with mt and it
works nice.
Umh...the only trouble is that i've not an home partition on the LVM...may
be usefull to install again or not ?
Also, probably i've to use: pci=noacpi because it cause me "kernel
disabling irq # xxx" (xxx is one of the irq assigned to uhci_hcd, usb, but i
think related to acpi also).
I'm testing centos...not so bad...but i think there are too much services
at start up (bluetooth on a server ?)
I don't like much red hat GPO, i prefer TSL policy, every new user add is
member of users group !!!
Ok...i think i can use this server...more or less now i've solved every
problem...
Cristian, thank you very much for your suggest and patience,
Buena suerte
Bujo
Subject: Re: Fw: TSL & Hardware - FAILURE ---> SOLVED
Content-Type: text/plain; charset="iso-8859-1"
Hi Cristian
good news...i've solved the problem.
I "RTFM" and check the dat, all jumpers were right, the scsi terminator
was right...scsi id usually is 6...
umhh...start again, check adaptec scsi bios (ctrl+a to start scsi
utility)...watching around parameters i found a channel ID 7 !!!!!! FOUND !
change to 6 save & reboot... DAT recognized...(more that one exactly...one
for each channel)...also CentOS found my dat, i did some test with mt and it
works nice.
Umh...the only trouble is that i've not an home partition on the LVM...may
be usefull to install again or not ?
Also, probably i've to use: pci=noacpi because it cause me "kernel
disabling irq # xxx" (xxx is one of the irq assigned to uhci_hcd, usb, but i
think related to acpi also).
I'm testing centos...not so bad...but i think there are too much services
at start up (bluetooth on a server ?)
I don't like much red hat GPO, i prefer TSL policy, every new user add is
member of users group !!!
Ok...i think i can use this server...more or less now i've solved every
problem...
Cristian, thank you very much for your suggest and patience,
Buena suerte
Bujo